Wiring And Schematic

Stereo amplifier is very simple, consisting of 5 active components including the power supply it. Series Stereo Amplifier With Tube was prepared with 5 units trioda tube consisting of 1 unit tubes 5Y3 GT vacuum rectifier, 2 tube tube trioda 6SF5 GT high-mu tube 6k6 and 2 units which form the power beam amplifiers. Power consumption for the circuit with a tube stereo amplifier is not more than 45 Watt. Current consumption for the circuit with a tube stereo amplifier is around 3A. A complete range of stereo amplifiers with this tube can be seen from the following series of images.

Stereo Amplifier With Tube

Sign Component Stereo Amplifier With Tube

R1, R10, R13 2.2M

R2 470K 1/2W

1 Meg 1/2W R3

R4 220K 1/2W

R5 330 Ohm 2W

R6 220K 1/2W

R7 2.2Meg 1/2W

R8 1Meg 1/2W

R9 720 Ohm 20W

R11 33K 1/2W

R12 22K 1/2W

C1, C9 400V 0.005uF

C2 0.05uF 600V

C3 20uF 25V

C4 0.01uF 400V

C5 200uuF 400V

C6, C7 15uF 450V

C8 15uF 400V

T1 117V Primary, Secondary 350VCT, 2 × 6.3V

T2 7600 Ohm Primary, Secondary 4 or 8 Ohm

SW1 SPST Switch

SP1, SP2 12 "4 / 8 ohm

C8 in the series stereo tube amplifier with the above serves to reduce radio frequency interference and to optimize the work of a wild series of ampifier stereo with these tubes.

Stereo amplifier is very simple, consisting of 5 active components including the power supply it. Series Stereo Amplifier With Tube was prepared with 5 units trioda tube consisting of 1 unit tubes 5Y3 GT vacuum rectifier, 2 tube tube trioda 6SF5 GT high-mu tube 6k6 and 2 units which form the power beam amplifiers. 

Power consumption for the circuit with a tube stereo amplifier is not more than 45 Watt. Current consumption for the circuit with a tube stereo amplifier is around 3A. A complete range of stereo amplifiers with this tube can be seen from the following series of images.

Stereo Amplifier With Tube

Sign Component Stereo Amplifier With Tube

Power supply for EL-34 tube is specially designed for the purposes of power supply at the push-pull amplifier with EL-34 tube as in article 35 Watt Tube Power Amplifier Push Pull before.
Power supply for EL-34 tube amplifier is made with transformers CT and 2 pieces diode as rectifier. Mechanical filters are applied in the power supply uses 3 levels. Power supply for tube power amplifier can deliver output voltages +220 VDC. Circuit details can be seen in the following figure.

The above power supply circuit has a high output voltage so that need to be considered in the manufacture and perakitanya because electricity can tesengat (stun). Power Supply For Tube Power Amplifier With Diode EL-34 was created specifically for the power amplifier tube push pull EL-34.